CONFIGURATIONS
TIP-TITE® High Lift Drum Dumper
This High-Lift Drum Dumper allows drums to be loaded at floor level, sealed against a discharge cone, elevated and tipped, mating the cone to a gasketted inlet port on downstream process equipment.Trademarked TIP-TITE®, the dumper accommodates drums from 30 to 55 gal (115 to 200 liter) and can discharge bulk material into process vessels and equipment inlets 5 to 10 ft (1525 to 3050 mm) above the plant floor.
The drum platform is raised by a single hydraulic cylinder, creating a dust-tight seal between the rim of a drum and the underside of the discharge cone.
A second hydraulic cylinder raises the platform-hood assembly vertically, with a third hydraulic cylinder tipping it to a dump angle of 45, 60 or 90 degrees, stopping it with the aid of a motion-dampening feature. At full rotation, the vertically oriented cone of the assembly mates with a gasketted inlet port fitted to the lid of an optional hopper with integral flexible screw conveyor or pneumatic pick-up adapter, or to existing process equipment.
A pneumatically actuated slide gate valve prevents material flow until the discharge cone has been properly seated in the gasketted inlet port.
The all-stainless unit can be finished to sanitary or industrial standards. Other models are offered in mild steel with durable industrial coatings, or with material contact surfaces of stainless steel.
Oprima para ampliar
Oprima para ampliar
TIP-TITE® High-Lift Drum Dumper seals drum rim against a discharge cone, raises and tips the drum, mates the cone against a gasketted connection that is 5 to 10 ft (1525 to 3050 mm) above the plant floor, and discharges bulk material dust-free through a slide gate valve.
X-0609